How to configure DSL connection on Cisco Router 820

Below are the configuration I have tasted for Fast Telco DSL Connection in Kuwait. Change the DNS  PVC  and Username password according to your ISP.

Router# sh startup-config
Using 1318 out of 131072 bytes
version 12.2
no parser cache
no service single-slot-reload-enable
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
logging rate-limit console 10 except errors
no logging console
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip dhcp pool local
no ip dhcp-client network-discovery
vpdn enable
vpdn-group pppoe
protocol pppoe
interface Ethernet0
description LocalNetwork
ip address
ip nat inside
ip tcp adjust-mss 1452
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 1/100
pppoe-client dial-pool-number 1
dsl operating-mode auto
interface Dialer1
mtu 1400
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
ppp chap hostname  username
ppp chap password 7  Password
ppp pap sent-username username password 7  Password
ip classless
ip route Dialer1
ip http server
ip nat inside source list 1 interface Dialer1 overload
access-list 1 permit
line con 0
stopbits 1
line vty 0 4
scheduler max-task-time 5000

Leave a Reply

Your email address will not be published. Required fields are marked *